Description
Stepped Throttle Lever Bushing goes in to the existing throttle lever to reduce the hole size. The smaller diameter of the bushing is .52″ which will fit inside a standard Holley or Edelbrock lever. The center holes measure .257″
Stepped Throttle Lever Bushing goes in to the existing throttle lever to reduce the hole size. The smaller diameter of the bushing is .52″ which will fit inside a standard Holley or Edelbrock lever. The center holes measure .257″
Weight | .02 lbs |
---|---|
Dimensions | .62 × .62 × .162 in |